SurfaPaint™ Floor Epoxy Enamel

Epoxy paint 2 components solvent based

SurfaPaint ™ Floor Epoxy Enamel is a high-performance, two-component epoxy amine product, designed to resist aggressive chemicals, water, mineral oils, most dilute acids and alkalis, while being ideal for suitable for surfaces that receive high mechanical stress.

The composition of SurfaPaint ™ Floor Epoxy Enamel is an epoxy polyamine for use on substrates where high impact and / or friction loads are common. Highly recommended for interior concrete floors such as workshops, warehouses and industrial floors, swimming pools, tanks, fountains, boats, metal structures. Anti-slip inert particles can be added when very high loads are expected.

It has anti-properties and is an excellent coating for floors that are exposed to different temperature ranges with a maximum of 60 ° C and a minimum of 25 ° C. If there is the need to increase slip resistance, the addition of non-slip quartz sand NanoPhos < / strong> in the system.

It can be applied directly in two coats or in approved primers depending on the conditions of the concrete substrate.

PRODUCT SYSTEM: SurfaPaint ™ Floor Epoxy Primer & amp; SurfaPaint ™ Floor Epoxy Enamel

Features

• High resistance to water, chemicals, dilute acids and alkalis.
• Resistance to large temperature differences (-15 ° C to + 70 ° C).
• Glossy finish.
• High mechanical strength
• With anti-corrosion action

Application

Final coating of paint on industrial indoor floors, garages, workshops, warehouses, department stores, etc.

Application Tip:
During application the surfaces must be dry and protected from rising moisture (eg with epoxy anti-osmotic primer SurfaPaint ™ Epoxy Primer WB )
Solvent: NanoPhos Thinner A