SurfaMix™ P

Nanostructured acrylic primer for acrylics & water-based plastic paints.

For plasters, drywall, cement boards, & surface repainting.

SurfaMix ™ P is a penetrating primer enhanced with fine resinous nanoparticles that exhibit a size distribution around 60 nm. These nanoparticles can penetrate deep in the substrate yielding a coherent and solid result for the application of emulsion paints. In practice, it is often used when painting many kinds of porous materials, such as concrete and especially substrates that are not water resistant and will be exposed to the natural elements. Priming gypsum board (drywall) is also standard practice with new construction because it seals the wall and aids in preventing mold. It can be also applied on already painted areas, when a paint refreshing is required. Well-engineered to be applied on humid surfaces, where mould problems exist. DeSalin™ AM should be used as a cleaner on mouldy surfaces before use of the primer. All in all, SurfaMix ™ P reduces the water absorption coefficient of porous substrates and does not affect the breathability of the substrate. It is water-based, odourless and environmentally friendly while it is slightly bluish in colour for identifying the application pattern. Apart from its nano engineered nature, SurfaMix ™ P is a concentrated formulation, exhibiting a much cost-effective practical use, as each part of SurfaMix ™ P can be diluted in 3 (for porous cementitious renders or masonry) or 4 (painted substrates) parts of water, yielding 4 or 5 times its original volume.

Features:

• Consolidates dusty or friable surfaces
• Enhances adhesion to a broad range of substrates
• Prevents peeling off of topcoat emulsions
• Improves appearance of topcoat
• Deep penetration in porous surfaces due to its nanostructure
• Dilutable to 4 to 5 times its original volume
• Bluish colour for easy application
• Water-based and odourless

Application:

Interior and exterior building surfaces, such as cement, walls, plasterboard, plaster, concrete and bricks.

Application Tip: 1: 3 to 1: 4 dilution with water is recommended. Can be coated with any SurfaPaint water-based product