LOGIN

SurfaPore H

Water, oil and dirt protection for textiles

SurfaPore® H protects and waterproofs upholstery fabrics, carpets, curtains and surfaces covered with textiles, assuring that water and dirt are effectively repelled by chemical forces. Water and oily threats, such as food or grease, cannot penetrate and cannot stain the treated surfaces thereby making it more difficult for the surfaces to pick up dirt, creating a clean looking appearance, which lasts longer and can be easily cleaned.

GENERAL CHARACTERISTICS

SurfaPore® H is an innovative water-based product that can easily be applied on textiles such as cotton and leather without affecting their original appearance. It creates a chemically and mechanically stable thin layer on the treated surfaces that prevents water, oil and grease from penetrating. SurfaPore® H advanced formulation assures effective and long lasting protection.

APPLICATION SURFACES

Cotton, leather, textiles, natural fibres, upholstery fabrics, curtains, carpets

APPLICATION NOTES

Surface Application: The application surface must be clean, degreased and dry. Mix the product thoroughly to homogenize. No dilution is required. Apply by using spray, brush or roller. Before full scale application test results on a small area. On very absorptive surfaces re-apply within 1 hour. Maximum protection is achieved 24 hours post application. Cleaning of the treated surfaces with abrasive chemicals should be avoided.

Consumption: Estimated consumption rate 8-15 m2/L, strongly dependent on the properties of the applied surface.

mark1POINTS OF SALE Where can you find NanoPhos products
NanoPhos Α.Ε.
Technological & Science 
Park, Lavrio, Greece 19500
Τel: (+30) 22920 69312
Fax: (+30) 22920 69303

FIND US ON

Design sandteam   

Development ARTIFIEDWEB - WEB DESIGN & DEVELOPMENT

Log in

create an account

fb iconLog in with Facebook