Plastic Bottles/Barrels
10-12 m²/L
Safety Data Sheet
Τεχνικό Δελτίο Προϊόντος
Δελτίο Δεδομένων Ασφαλείας

SurfaPaint Kirei Paste Additive

Self-cleaning & deodorizing cool paint 

Inspired by the Japanese word Kirei that simultaneously means clean and beautiful, SurfaPaint Kirei Paste is a functional and intelligent industrial paint additive that transforms ordinary paints to self-cleaning, remaining as new. Dirt, bacteria, fungi and mould are decomposed to carbon dioxide and inorganic material just by the energy of light. 



After the industrial addition of SurfaPaint Kirei Paste in conventional paints, the resulting SurfaPaint Kirei is a photocatalytic cool paint with self-cleaning properties. When applied on exterior surfaces SurfaPaint Kirei decomposes organic stains, pollution and prevents mould growth and reflects more than 94% of the incident InfraRed (IR) radiation, saving energy and reducing building heating/cooling costs. Reflectance values are further enhanced by the photocatalytic, self-cleaning effect and remain unchanged for a longer period of time when compared to a conventional paint as it is a weather resistant paint with exceptional coverage, opacity and resistance to UV radiation. Therefore, the original, fresh look of a newly-painted surface remains long after application. When SurfaPaint Kirei is applied on interior surfaces, artificial light activates it and sterilizes airborne or surface-bound microorganisms, deodorizes and improves indoor air quality. The paint is white and can be tinted as pal colour (only with inorganic pigments). SurfaPaint Kirei is a Cool Coating,  certified by the European Cool Roofs Council (ECRC).





After the industrial addition of SurfaPaint Kirei Paste in conventional paints, the resulting SurfaPaint Kirei can be applied Exterior or interior wall surfaces: masonry, concrete, plaster, drywalls, and wherever emulsion paints are applied.



Applicability: After the industrial addition of SurfaPaint Kirei Paste in conventional paints, the resulting SurfaPaint Kirei can be applied directly on interior or exterior wall surfaces (masonry, concrete, plaster, drywalls), and wherever water based, acrylic paints are applied. New substrates from cement or masonry should have cured for more than 3-4 weeks before primer application. For better results apply SurfaMix P as a primer. Adverse conditions during or immediately after application may affect the coating's properties.Contact NanoPhos () for instructions on industrially adding SurfaPaint Kirei Paste to conventional paints or refer to the Product Data Sheet herein. 

Preparation: Ensure all surfaces are clean and dry prior to application. Remove any dust and dirt.

Application note: Stir well before application. Do not dilute for bridging gaps and hairline cracks of up to 0,5 mm. For cracks bigger that 1mm, fill the gap with a suitable putty. If thinning is required add up to 10% water by volume. Application temperature should be between 8 - 35oC. Apply 2-3 even coats using a good quality brush, roller or by spraying with a tip of a diameter 1,4mm or more. Do not over-brush. Ensure corners and edges are adequately covered. Additional coats should be applied 4-6 hours after the previous application.

Spreading Rate: 10-12 m²/L.

Drying Time: Typically 1 hour depending upon coat thickness. Low temperatures and high humidity will lengthen drying times.



mark1POINTS OF SALE Where can you find NanoPhos products
NanoPhos Α.Ε.
Technological & Science 
Park, Lavrio, Greece 19500
Τel: (+30) 22920 69312
Fax: (+30) 22920 69303


Design sandteam   


Log in

create an account

fb iconLog in with Facebook