LOGIN

DO IT YOURSELFHOW DO I repair cracked plaster and damaged paint from rising damp

WHAT WILL I NEED

SurfaPore C
Water protection of porous surfaces such as cement, stones, walls and grout
SurfaMix C
Elasticity and workability improvement of cement and plaster
SurfaPaint ThermoDry Interior
Thermal Protective Paint for Interior Walls & Ceilings
SurfaPaint ThermoDry Exterior
Thermal Protective paint for exterior masonry and walls
APPLICATION TIME
2 day
METHOD OF APPLICATION
SPATULA, ROLLER or BRUSH
INSTRUCTIONS
1
With a spatula, remove the loose material from the surface.
2
Clean the surface with a brush.
3
Apply SurfaPore C and allow for one week to pass, in order for the moisture pressure to be relieved and for the humidity to evaporate and dry.
4
Apply Surfamix C as a primer (diluted 1:3 with water). Three hours after priming, if required, re-plaster by using SurfaMix in your plaster mix. Allow the plaster to dry off.
5
Prime the repaired area using SurfaMix P as a primer. (diluted 1:3 with water)
6
Apply the appropriate paint: SurfaPaint Thermodry Interior (interior walls) or SurfaPaint Thermodry Exterior (exterior walls).
7
The surface dries completely within 48 hours of final application.
NanoPhos Α.Ε.
Technological & Science 
Park, Lavrio, Greece 19500
Τel: (+30) 22920 69312
Fax: (+30) 22920 69303

FIND US ON

Design sandteam   

Development ARTIFIEDWEB - WEB DESIGN & DEVELOPMENT

Log in

create an account

fb iconLog in with Facebook